Four aspects of bicycle pedals that need to be known during the installation process

There are also some things to notice when installing our bicycle pedals:

1. Before installing the pedals, be sure to distinguish the driving side and the non-driving side. "L" means the non-driving side and "R" means the driving side. An intimate pedal will also be marked on the tightening force, which is convenient for players. For installation, please refer to the pedal installation manual of each brand for the specific tightening force of the pedal.

2. Before installing the pedal, apply a proper amount of grease to the thread of the pedal to prepare for installation. Applying grease can make the installation process of the pedal and the crank easier and make the pedal more convenient when disassembling, effectively eliminating Abnormal noise occurs when the thread is engaged with the crank.

3. Firstly tighten the pedal clockwise by hand to ensure that the thread of the pedal and the crank are in the correct position. In order to install more quickly, you can use the Allen key to speed up the installation after tightening to a certain degree, and the pedal is initially tightened. Then use an Allen key to torque it to the specified force.

4. The steps of installing the non-drive side pedal are the same as above. First tighten the pedal counterclockwise by hand, and then use the hexagonal tool to tighten it. Please ensure that the tightening force prevents the pedal from loosening and causing danger.