Bicycle V Brake Installation

1. Material preparation:
(1) Mountain bikes that need to be replaced with v-brakes
(2) v brake
(3) Tools

2. Install the v-brake
The installation of the v-brake here refers to the installation of the main part of the v-brake on both sides of the bicycle. The v-brake comes with a small metal column, and it can be inserted into the small hole of the installation position of the v-brake of the poor bicycle. This step The installation is not difficult.

3. Adjust the position of the brake pads
Adjusting the brake pads to the proper position is that when the brakes are used, the brake pads just act on the steel rim of the bicycle, not elsewhere

4. In the case of loosening the spring, adjust the position of the wire and fix it.

5. Install the spring, you will find that the strength of the spring on both sides of the brake is different, adjust the tightness of the screw at the position marked in the picture, you can fine-tune the strength of the spring. Adjust several times until the springs on both sides of the brake have the same force.