How to Replace Bike Stand Chains Yourself

Update:05-05-2022
Summary:1. Observe the installation method Observe whether there are installation holes on the left and right parts of your fram...
1. Observe the installation method
Observe whether there are installation holes on the left and right parts of your frame. If there are installation holes, you can buy a bicycle support foot support with two holes. If there are no installation holes, you can fix the foot support on the beam of the frame.
2. Measure the size
Use a vernier caliper or an ordinary triangle to measure the distance between the two mounting holes. The general bicycle support foot supports on the Internet are marked with the applicable wheel size. If you are not sure about the wheel size, you can measure the length of the bicycle's original foot support. Buy.
3. Purchase
According to the relevant size to buy on the relevant shopping site, you can also buy in physical stores.
4. Install the foot support
Install the foot support on the inside of the two holes of the frame, and use the Allen wrench to tighten the two fixing screws. If you purchased a bicycle foot support with adjustable length, you can adjust the length of the bicycle upright, and the installation is completed.
5. Test effect
Check that the bike chainstays are functioning properly and that the bike is balanced.
PREV：How to adjust the bicycle caliper brake if it can't stopNEXT：Bottle Cage Buying Guide

Hot Products