How to ride without adjusting the brake lever

In addition to the fun of riding in the evening mountain bike, you can also adjust the bike by yourself to adjust the bike to a very own angle of fun, and you can also find a sense of accomplishment. Many parts of the mountain bike can be adjusted, and they need to be adjusted according to their physical conditions after getting the bike, such as the brake lever.

The brake lever can also be called a brake lever. It sounds like a very simple accessory, but it has at least three parts that need to be adjusted to suit your riding position. The adjustment basis comes from the width of our palm and the length of our fingers. Now that hydraulic brakes are very popular, one finger can control the brake lever to give him the maximum braking force.

First, adjust the position of the brake lever and determine the most suitable position of the brake lever. Too close or too far away from the grip will affect the best braking effect. According to the principle of leverage, your fingers should be relaxed at the end of the brake lever, the angle of the hand and the arm. A straight line is the best position, and the maximum comfort and braking effect can be obtained when riding.

The angle of the brake lever determines the pressure on the wrist when riding. Whether the angle of the wrist is comfortable and natural, and whether the wrist will be sore during riding, depends on the tilt angle of the fingers, wrist, and whether the arm is in a straight line. This can solve some of the problem of wrist soreness, to a certain extent. It can also relieve the numbness of the hands.

When the angle of the brake lever is not adjusted properly, it will also cause some problems. For example, if the angle of the brake lever is too high, the bending angle of the wrist will increase. For a long time, the wrist is prone to soreness and even hand numbness. Adjust the angle of the brake lever. Too low: the wrist is too stretched and it is difficult for the fingers to effectively control the brakes, which will be prone to danger during riding.

The stroke of the brake lever of each mountain bike can also be adjusted. This is to facilitate friends with different physical conditions to adjust to meet their own requirements. At the same time, the specific adjustment position of each brake lever is different. Some brake levers require tools to make adjustments, and some do not. Make sure that the first joint of the index finger is at the brake lever so that the brake is within reach and safe.

Of course, everyone's finger length is different, so you need to adjust it to your own state according to your own situation. If the adjustment is too close, the second joint of the index finger is too close to the brake lever, which is inconvenient to grip and brake; if the adjustment is too far, the index finger will have a lot of effort to touch the brake lever, or even reach it, which is dangerous.

There are not many problems with bicycles. Some friends think that other people's bicycles are easy to ride, but their own bicycles are not easy to ride. In addition to psychological factors, bicycles can often be adjusted to solve many problems.